Catalogue
How to maintain neon signs?
Neon signs maintenance tips
- Apply anti-rust oil to the screws
- Do not stack neon lights
- Regularly remove dust
- Do not move installed neon tubes
Cleaning steps for neon signs
- Unplug the power cord
- Start cleaning
- Plug in and check
How to maintain neon signs?
Neon Sign Maintenance Tips
Apply anti-rust oil to the screws
Rusty screws can affect installation and disassembly, applying anti-rust oil to the screws every month is recommended.
Do not stack neon lights
Scratches on the surface of neon signs acrylic back panel are likely to occur if mishandled, this can affect the overall appearance.
To avoid scratching the surface, please be careful not to stack them during movement.
Regularly remove dust
To keep your neon sign clean, remove the debris on the surface once a week. For a more thorough clean, consider brushing the surface of the neon tubing.
Do not move installed neon tubes
Do not move the lamp tube during maintenance, this might potentially cause a power outage or wording deviations.
Cleaning Steps For Neon Signs
Unplug the power cord
Turn off the neon sign and unplug it before you start cleaning.
Use brush
Using a brush to clean the dusty areas of the neon sign, please ensure that the brush covers the neon tubing.
Use damp cloth
Please use a slightly wet paper or cloth to gently wipe your indoor neon signs, it is very important that the water does not drip. When wiping, avoid letting the water enter the lamp tube.
Use dry cloth
After wiping with a damp cloth, use a dry cloth to wipe off the excess water and carefully check to see whether the stain has been removed.
Plug in and check
After making sure the sign is clean, please insert it back in to enjoy your neon sign.
